12mm dia mild steel electro galvanized, in three meter lengths with hexagonal coupling of both the ends.

32mm N.B., G.I. Medium pipe in three meters length with a socket at one end.

Simple Installation of India Mark-II Handpump, when installed properly, gives very long uninterrupted service. For step installation procedure and other details, please refer to our installation and Maintenance Manual.

• Suitable for borewell installation with static water levels upto 45 mtrs.
• The entire above ground components are fabricated out of steel sections hence they are strong and study.
• The pump Body is hot-dipped galvanized hence corrosion proof.
• Handle is designed for ease of operation.
• Pre-greased sealed Ball Bearings add to the ease of operation and elimination of greasing during use.
• The Spout design ensures collection of water in any type pf vessel normally used.
• Pedestal Design ensures the bore hole is sealed to prevent water source contamination.
• Cylinder with highly polished brass liner ensures long life of Nitrile Rubber Pump Bucket.
• The Rubber parts in the cylinder are nontoxic and hence they course no health hazards.
• All internal parts of the cylinder are made of Gunmetal to ensure long life.
• These pumps can be easily adopted for Shallow Well, Windmill and Motonised operations with minor modifications.
• India Mark – II pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.